Skip to main content
The Elegoo Centauri series of 3D printers is amazing, but they get even better with Elegoo Connect from OctoEverywhere! Elegoo Connect enables free & unlimited AI print failure detection, remote access, print notifications, and more. OctoEverywhere is proud to be Elegoo’s official partner for AI failure detection and remote access. To set up Elegoo Connect, you will need to find the IP address of your Elegoo Centauri 3D printer. Here’s how!
  1. Tap the gear icon on your Elegoo Centauri touch display.
  2. Tap the “Network” tab at the top of the display.
  3. Ensure Wi-Fi is enabled & the printer is connected to your network.
  4. The printer’s IP address is listed under your connected network.
The format of the IP address is xxx.xxx.xxx.xxx with numbers. Your printer’s IP address might look like:
  • 192.168.1.15
  • 10.0.0.102
If you need to connect your Elegoo Centauri series 3D printer to wifi, follow these steps:
  1. Tap the gear icon on your Elegoo Centauri touch display.
  2. Tap the “Network” tab at the top of the display.
  3. Ensure the Wi-Fi toggle is enabled.
  4. Select the name of your Wi-Fi network.
  5. Enter your Wi-Fi password.
  6. Done 🎉
Be sure to set up Elegoo Connect for your Elegoo Centauri series 3D printer! It gives you tons of free amazing perks and only takes 30 seconds to set up!