Skip to main content
The OctoEverywhere Bambu Connect plugin needs your Bambu Lab 3D printer’s Access Code to connect and provide remote access, AI failure detection, and more. We have created a quick, easy guide to help you find your Access Code for any Bambu Lab printer. Just pick your printer below.
To find your Access Code on the Bambu Labs P1P or P1s:
  • Use the screen on your P1P or P1s to open the printer settings.
    • The settings icon is an octagon with a black dot at its center.
  • Select the WLAN option in the settings menu.
  • At the bottom, you will find the Access Code.
  • Write down or take a picture of the Access Code.
To find your Access Code on the Bambu Labs P1P or P1s:
  • Use the screen on your P1P or P1s to open the printer settings.
    • The settings icon is an octagon with a black dot at its center.
  • Select the WLAN option in the settings menu.
  • At the bottom, you will find the Access Code.
  • Write down or take a picture of the Access Code.
To find your Access Code on the Bambu Labs X1 Carbon or X1E:
  • Use the touch screen on your X1 Carbon or X1E to open the printer settings.
    • The settings icon is an octagon with a black dot at its center.
  • Select the “General” tab at the top of the settings page.
  • Look for the text that says “Access Code”
  • Write down or take a picture of the Access Code.
If your Access Code is all zeros, press the refresh icon next to the Access Code or temporarily enable and disable LAN Only mode. The Access Code will continue to work even when you disable Lan Only mode again.