> ## Documentation Index
> Fetch the complete documentation index at: https://help.octoeverywhere.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Bambu Connect External/Alternative Webcam Setup

One of the amazing features of OctoEverywhere's [<u>Bambu Connect</u>](https://octoeverywhere.com/bambu?source=help_bambu_webcam_setup) is the ability to set up an external webcam for your Bambu Lab 3D printer, which allows you to stream at a full 15 FPS. You can also use the external webcam for remote access, AI failure detection, and notifications, or continue using the built-in webcam.

If you already have a webcam set up that supports MJPEG or RTSP, you can enter its details on the [<u>OctoEverywhere printer settings page</u>](https://app.intercom.com/). Select your printer, enable the Alternative Webam, and enter the webcam URLs.

If you need help selecting a webcam or setting up a USB-based webcam, our blog has a full guide.

[**See The Full Alternative Webcam Setup Guide**](https://blog.octoeverywhere.com/full-frame-rate-webcam-streaming-for-bambu-lab-3d-printers/)